Table of Contents
Advertisement
warnings
important technical information:
TESTED IN ACCORDANCE WITH ANSI Z21.1b-2003, 27th Edition, supplemented by CGA Interim Requirement 58b
(IR58) STANDARD FOR HOUSEHOLD COOKING GAS APPLIANCES. IN CANADA TESTED IN ACCORDANCE WITH
CUL 1.1 GAS RANGES, CURRENT ISSUE. Check your local building codes for the proper method of installation. In the
absence of local codes, this unit should be installed in accordance with the National Fuel Gas Code No. Z223.1 Current
issue and the National Electrical Code ANSI/NFPPA No. 70 Current issue or the Can B149 Installation Codes for Gas
Burning Appliances and C22.1 Canadian Electrical Code Part 1.
please retain this manual for future reference!
iii
IMPORTANT!
All cooktops must be installed with a back-guard. One
of three available back-guards must be ordered separately
and installed at the back of the cooktop for combustible
materials less than 12" from cooking surface. The three
back-guard choices include 12" Low Back, 22" High-Back, or
22" High-Shelf. Before using the cooktop ensure that it is
equipped with a proper back-guard. Refer to the Installation
Instructions accompanying this appliance.
CAUTION!
When connecting the unit to propane gas,
make certain the propane tank is equipped with
its own high-pressure regulator in addition to
the pressure regulator supplied with the
cooktop. The pressure of the gas supplied to
the appliance must not exceed 14" (34.57 mB)
water column from the propane gas tank to
the pressure regulator.
IMPORTANT!
Installation must conform with local codes or, in
the absence of local codes, with the National
fuel Gas Code, ANSI Z223.1/NFPA 54.
PLEASE NOTE:
In the Commonwealth of Massachusetts, gas
connection must be performed by a licensed plumber
or licensed gas fitter.
!
Advertisement
Table of Contents
