Capital PSCT484BG Installation Manual page 18

before calling for service
Before calling for service, check the following to avoid
unnecessary service charges.
Be sure to check these items first:
• Is there a power surge in the area?
• Is the household fuse blown or the circuit breaker tripped?
• Is the Range disconnected from the electrical supply?
IF THE BURNERS DO NOT IGNITE:
• Are the burner caps properly aligned on the burner bases
(sealed burners)?
• Are the burner ports clogged?
• Is a fuse blown or is the circuit breaker tripped?
• Is the manual shut-off valve closed, preventing the
flow of gas?
• Are the burner ports clogged?
• Is the spark igniter sparking (surface burners)?
NOTE:
The DATA RATING PLATE containing model #, serial #,
and gas type, is located on on the underside of the
chassis, near the gas inlet connection and electric power
cord. In most cases after installation, technicians are
unable to access this information. Therefore it is
necessary to capture this information in this guide
prior to installation.
12