Cleaning And Maintenance - Russell Hobbs RH1130 Instructions And Warranty

Brushed satin finish hand mixer
Table of Contents

Advertisement

Avoid coming into contact with moving parts. Keep hands, hair, clothes, as well
as spatulas and other utensils away during operation to prevent injury and/or
damage to the appliance.
The speed can be adjusted at any time. Starting from "O" (OFF), and then
adjusting the speed to the food type being mixed. For thicker mixtures, a low
speed is recommended. For fine consistency, use the high-speed settings.

CLEANING AND MAINTENANCE

This hand mixer is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0".
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
The body of the hand mixer and the stand should be cleaned with a damp cloth.
Do not let water enter the hand mixer or the stand.
Do not use bleach or other abrasive substance or solvents to clean your hand
mixer as it can be damaging to the finish.
Do not immerse the mixer in water or any other liquid, or hold it under a running
tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
STORING THE HAND MIXER
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the hand mixer in its box or in a clean, dry place.
Never store the hand mixer while it is still wet or dirty.
Never wrap the power cord around the hand mixer.
8

Advertisement

Table of Contents
loading

Table of Contents