Table of Contents
Advertisement
NOTE: Do not operate the hand mixer before inserting it into the food being mixed.
11. When you have finished using your hand mixer, unplug the appliance and
remove the foot by holding the motor body and turning the foot in an anti-clock
wise direction.
12. Clean the unit and the attachments thoroughly after use.
NOTE: Before first use clean all components. Rinse beater and dough hooks under cool
water and rinse. DO NOT IMMERSE OR ALLOW WATER TO TOUCH THE STICK
BLENDER MOTOR.
THE PULSE BUTTON
Use the pulse button to over-ride the speed control and give a burst of extra high speed
beating, regardless of the speed set on the speed control. Simply press and hold the
pulse button down. To avoid overheating, do not use the pulse function for more than 30
seconds at a time, and let it rest for a minute or so between pulses.
REMOVING THE BEATERS
To eject the beaters/dough hooks, move the speed selector dial to "O" (OFF), and
unplug the mixer, then shake off any excess food which is attached to the beaters or
dough hooks, into the mixing bowl. Hold both beaters/dough hooks, into the mixing bowl.
Hold both beaters/ dough hooks, to prevent from jumping out, and press the beater eject
button (located at the front of the handle).
SUGGESTIONS FOR USE
Move the beaters/dough hooks gently around the mixture to ensure uniform
•
results.
If you want to clean the sides and base of the utensil/container with a hand-held
•
utensil, first switch the machine OFF.
To avoid unnecessary splashing, immerse the beater/dough hooks into the
•
mixture before switching the appliance ON.
Unplug the appliance when not in use, before fitting or removing the
•
beaters/dough hooks and before cleaning it.
7
Advertisement
Table of Contents
