Important Safeguards - Russell Hobbs RH1130 Instructions And Warranty

Brushed satin finish hand mixer
Table of Contents

Advertisement

Congratulations on purchasing our Russell Hobbs Hand Mixer. Each unit is
manufactured to ensure safety and reliability. Before using this hand mixer for the first
time, please read the instruction manual carefully and keep it for future reference.
FEATURES OF THE BRUSHED SATIN FINISH HAND MIXER

IMPORTANT SAFEGUARDS

When using any electrical hand mixer, basic safety precautions should always be
followed including the following:
CAUTION: When using the hand mixer, the unit must not be used for longer than 1
minute cycles, as this puts pressure on the motor which could lead to overheating and
product malfunction. It is recommended to allow the hand mixer a few seconds break
after each cycle and not to use for more than 5 minutes for one single operation.
1. Please read the instructions carefully before using any hand mixer.
2. Always ensure that the voltage on the rating label corresponds to the mains
voltage in your home.
3. Incorrect operation and improper use can damage the hand mixer and cause
injury to the user.
4. The hand mixer is intended for household use only. Commercial use invalids the
warranty and the supplier cannot be held responsible for injury or damage
caused when using the hand mixer for any other purpose than that intended.
5. Avoid any contact with moving parts.
6.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
7. Children should be supervised to ensure that they do not play with the hand
mixer.
8. Check the power cord and plug regularly for any damage. If the cord or the plug
is damaged, the manufacturer or a qualified person must replace it in order to
avoid an electrical hazard.
2
.

Advertisement

Table of Contents
loading

Table of Contents