Table of Contents
Advertisement
C
O
M
M
E
R
C
Grounding Instructions
The C764 climber must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current which reduces
the risk of electrical shock. The climber is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. If you do not follow these
Grounding Instructions , you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or service person if you are
in doubt as to whether the climber is properly grounded. Do not modify the plug
provided with the climber—if it will not fit the outlet, have a proper outlet installed
by a qualified technician.
120V UNITS DESIGNATED FOR U.S. MARKETS
The climber is for use on a nominal 120-volt circuit and has a grounding plug that
looks like the plug illustrated in Diagram A. Make sure that the treadmill is
connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Diagram A
Proper grounding plug and
power outlet for 120v.
240V UNITS DESIGNATED FOR U.S. MARKETS
This product is rated for more than 15 amps and is for use on a circuit having a
nominal rating of 120 volts and is factory-equipped with a specific electric cord
and plug to permit connection to a proper electric circuit. Make sure that the
product is connected to an outlet having the same configuration as the plug. No
adapter should be used with this product. If the product must be reconnected for
use on a different type of electric circuit, the reconnection should be made by
qualified service personnel.
iv
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Advertisement
Table of Contents
