Safety Approval; Grounding Instructions - Precor EFX 5.17 Owner's Manual

WARNING
Per FCC rules, changes or modifications not expressly approved by Precor, could void
the user's authority to operate the equipment.
Canadian Department of Communications
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Depart-
ment of Communications.
Le présent appareil numérique n'émet pas de bruits radioéélectriques dépassant les
limites applicables aux appareils numériques de la class B prescrites dans le Règlement
sur le brouillage radioélectrique édicté par le ministére des Communications du Canada.

Safety Approval

When identified with the ETL-c logo, the EFX has been tested and conforms to the
requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar Electrical
Appliances.

Grounding Instructions

The EFX5.17 power conversion module (AC adapter) must be grounded via an earth
ground outlet. If it should malfunction or break down, grounding provides a path of least
resistance for electric current which reduces the risk of electrical shock. The EFX is
equipped with a DC power conversion module and AC power cord. The power cord's
plug must be inserted into an appropriate 110/120v outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to
whether the EFX is properly grounded. Do not modify the plug provided with the EFX—if
it doesn't fit the outlet, get a proper outlet installed by a qualified technician.
WARNING
This product is rated for use on a circuit having a nominal rating of 120 volts, 15 amps and
is factory-equipped with a specific electric cord, plug, and power conversion module to
permit connection to a proper electric circuit. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used with this
product. If the EFX must be reconnected for use on a different type of electric circuit, the
reconnection should be made by qualified service personnel.
ATTENTION: Haute Tension
Débranchez avant de réparer
page 4