Table of Contents
Advertisement
Main Menu
Replacing the Transmitter
Battery
If it takes several pushes on the
button to lock or unlock the doors,
replace the battery as soon as
possible.
Battery type: CR2025
Table of Contents
To replace the battery, place a cloth
on the edge of the transmitter, and
remove the upper half by carefully
prying on the edge with a small flat-
tip screwdriver.
Remove the old battery, and insert a
new battery with the
up. Snap the two halves of the
transmitter case back together.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
BATTERY
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
side facing
Remote Transmitter
61
Advertisement
Table of Contents
