Table of Contents
Advertisement
Main Menu
DIPSTICK
Check the fluid level with the engine
at normal operating temperature.
1.
Park the vehicle on level ground.
Shut off the engine.
2.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
Table of Contents
Automatic Transmission Fluid (U.S. models only)
3.
Insert the dipstick all the way into
the transmission. Make sure the
notch in the rubber cap fits in the
dipstick guide and that you push
the dipstick in all the way.
4.
Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
5.
If the level is below the lower
mark, add fluid into the filler hole
to bring it to the upper mark.
Pour the fluid slowly and carefully
so you do not spill. Clean up any
spill immediately; it could damage
components in the engine
compartment.
UPPER MARK
Always use Honda ATF-Z1
LOWER MARK
(Automatic Transmission Fluid). If
it is not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 as
soon as it is convenient.
151
Advertisement
Table of Contents
