Table of Contents
Advertisement
Main Menu
SUPPORT ROD
ENGINE COVER
3.
Lift the engine cover.
4.
Pull the support rod out of its clip
and insert the end into the square
hole in the engine cover bracket.
Table of Contents
ENGINE COVER
To Close the Rear Window:
Snap the support rod back into the
clip and lower the engine cover. Pull
the rear window down until it is
resting on the body, then push on
the center of the back edge until it
latches. Make sure it is securely
closed before driving away.
Service Station Procedures
Oil Check
Wait a few minutes after turning the
engine off before you check the oil.
1.
Remove the dipstick (orange
handle).
2.
Wipe off the dipstick with a clean
cloth or paper towel.
3.
Insert it all the way back in its tube.
DIPSTICK
CONTINUED
107
Advertisement
Table of Contents
