Table of Contents
Advertisement
Main Menu
Door and Lamp Monitor
The appropriate indicator comes on
in this monitor if the trunk, the roof
panel, the rear window, or either
door is not closed tightly. If a brake
light does not work, the
BRAKE
LAMP
indicator comes on when you
push the brake pedal with the
ignition switch ON (II).
A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.
All the indicators in the monitor
come on for a few seconds when you
turn the ignition switch to ON (II).
Table of Contents
Electric Power Steering
(EPS) Indicator
This indicator normally comes on
when you turn the ignition switch to
ON (II) and goes off after the engine
starts. If it comes on at any other
time, there is a problem in the
electric power steering system. If
this happens, stop the vehicle in a
safe place, and turn off the engine.
Reset the system by restarting the
engine, and watch the EPS indicator.
If it does not go off, or comes back
on again while driving, take the
vehicle to your dealer to have it
checked. With the indicator on, the
EPS is turned off, making the vehicle
harder to steer.
Instrument Panel Indicators
Traction Control System
(TCS) Indicator
This indicator has three functions:
1.
It comes on as a reminder that you
have turned off the traction
control system (TCS).
2.
It flashes when the TCS is
regulating the engine power.
3.
If it comes on and stays on when
the TCS is on, it indicates that
there is a problem in the TCS.
This indicator also comes on when
you turn the ignition switch to ON
(II) and goes off after the engine
starts. See page
131
for more
information on the TCS.
45
Advertisement
Table of Contents
