Table of Contents
Advertisement
Main Menu
Instrument Panel Indicators
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicator does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs is
burned out (see page
156
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you press the hazard warning
button, both turn signal indicators
blink. All turn signals on the outside
of the vehicle should flash.
High Beam Indicator
This indicator comes on with the
high beam headlights. For more
information, see page
51
46
Table of Contents
''Daytime Running
Lights'' Indicator
Canadian models only
This indicator comes on when you
turn the ignition switch to ON (II)
with the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
). Replace
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
.
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink,
and the engine will not start (see
page
55
).
This indicator also blinks several
times when you remove the key
from the ignition switch.
Cruise Control Indicator
This indicator comes on when you
set the cruise control. See page
100
for information on operating the
cruise control.
Low Fuel Indicator
This indicator comes on as a
reminder that you must refuel soon.
Advertisement
Table of Contents
