Oven Shelves And Shelf Supports - John Lewis JLBIOS661 Instruction Manual

6. Turn 2 fasteners by 90° and remove them
from their seats.
7. Carefully lift and remove the panel of glass.
90°
2
1
Clean the glass panel with water and soap.
Dry it carefully.
Warning! Only clean the glass panel
with water and a soap. Abrasive
cleaning agents, stain removers and
sharp objects (e.g. knives or scrapers)
can cause damage to the glass.
Inserting the door and the glass
panel
When the cleaning procedure is completed,
insert the glass panel and the oven door. To
do so, do the steps in reverse.
The decorated internal panel marked with a
decorative frame must be assembled with the
screen-printing outside of the oven. The panel
of glass is assembled correctly if you do not
feel any roughness when you pass your fingers
over the surface.
Insert the internal panel of glass into the right
seats as on the picture.
Oven Shelves and Shelf
Supports
To clean the oven cavity remove the shelf
supports.
Removing the shelf support rails
1. Pull the rails away from the oven wall at
the front.
21