Before Starting; General Cautions; Cautions On Installation - Clarion VRX815 Installation And Wire Connection Manual

3.

GENERAL CAUTIONS

1. Do not open the case. There are no user ser-
viceable parts inside. If you drop anything into
the unit during installation, consult your dealer
or an authorized CLARION service centre.
4.

CAUTIONS ON INSTALLATION

1. Prepare all articles necessary for installing the
main unit before starting.
2. This model is used with the LCD panel slid for-
wards (shell loading system). On some types
of cars, the LCD panel may touch the dash-
board or shift lever, in which case it cannot be
installed. Check that the set will not hamper
operation of the shift lever before choosing the
place of installation.(Figure 2)
Dashboard
Shift lever
(check that it does not
touch the LCD.)
Figure 2
3. Install the unit within 30° of the horizontal plane.
(Figure 3)
Max. 30˚
Figure 3
4. If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.
48
VRX815
2. Use a soft, dry cloth to clean the case. Never
5. Use the enclosed screws for installation. Us-
6. The source unit has mounting screw holes for
Shift lever
use a rough cloth, thinner, benzine, or alcohol,
etc. For tough dirt, apply a little cold or warm
water to a soft cloth and wipe off the dirt gen-
tly.
ing other screws can cause damage. (Figure
4)
Chassis
Max. 8 mm
Figure 4
NISSAN (N marks) and TOYOTA (T marks)
vehicles.
T N T
N T
Figure 5
Chassis
Damage
N