Installing The Main Unit - Clarion VRX815 Installation And Wire Connection Manual

5.

INSTALLING THE MAIN UNIT

Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting bracket
inward, then secure the stopper as shown in
Figure 6.
2. Wire as shown in Section 8.
3. Insert the main unit into the universal mount-
ing bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
7-3/16" (182 mm)
Hole
Screwdriver
Outer escutcheon
Hole
Stoppers
Main unit
2-Spring
Note: Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge of
the main unit.
Figure 6
Notes:
1) Some car models require special mounting kits
for proper installation. Consult your Clarion dealer
for details.
2) Fasten the front stopper securely to prevent the
main unit from coming loose.
Rear fastening hole (of vehicle)
Instrument panel
Rubber cap
Universal mounting bracket
Stoppers
49
VRX815