Direct Entry Of The Id Number To Be Call Alert - Motorola GTX User Manual

35 Call Alert™ Page Operation
(cont.)
Direct Entry of the ID Number to be C all Alert
Paged
1. Press the (Call) button to directly enter the ID
number to be called.
Note:
• If the radio is programmed with both Private Call
(PC) or Call Alert (CA) features, then press the call
button twice to enter the CA mode.
2. The display shows "CA" momentarily and then the
last ID number transmitted or received, or blank
display with six dashes if the last display was not
stored. You can now enter the ID number to be
paged.
3. Enter the new six-digit ID number from the keypad.
On the display, the old ID number disappears, and
the new digits appear as they are being entered. The
cursor flashes to indicate the location of the next
number to be entered.
Notes:
• If you press PTT after entering an illegal ID number,
then illegal tone is heard and the display shows
"iLLEG Id". A few moments after the PTT is
released, the illegal number you have entered will be
displayed.
• Once you have started entering numbers, the
(Backspace Delete) button will function as a
backspace key. Pressing this key will cause the last
digit entered to be erased, and the cursor to move to
the left. When the last digit has been erased, an
illegal tone will sound,