Changing Engine Oil & Filter - BMW R 1200 CL Service Manual

R 1200 CL
BMW Inspection I Procedures (600 Miles)
Changing Engine Oil & Filter
BMW inspections/services I, II, III, IV
Note: Drain oil with engine at operat-
ing temperature.
• Remove fill plug.
• Unscrew oil drain plug & drain oil.
• Fit oil drain screw plug with new
sealing ring.
• Using oil filter wrench, P/N 88 88 6
11 4 650, unscrew oil filter.
• Coat sealing ring of new oil filter
with oil and screw in.
• Fill the new oil filter with oil and,
install.
• Recheck oil level approx. 10 min-
utes after test run.
I I m m p p o o r r t t a a n n t t : : Never top up engine oil
above 'MAX
' mark.
R 1200 CL Introduction
Change Engine Oil and Filter
Add new to proper level (do not overfill)
Filling capacity, engine:
With oil filter change
Without filter change
Oil capacity between min and max
marks app. 0.5 liter (.53 qt)
Tightening torque:
Oil filter
Oil drain plug
Engine oil grades:
Brand-name HD oil for petrol engines of
API classification SG/SH
4 qt.
3.7 qt.
11 Nm (8 ft. lb.)
32 Nm (23 ft. lb.)
71