Alarm System Programming Information - BMW R 1200 CL Service Manual

R 1200 CL

Alarm System Programming Information

Programming Procedure
The alarm system is designed for 12 programmable functions. However, only 5
functions are currently available (beeping tone, panic alarm, tone type and auto-
matic activation of the starter immobilizer and automatic arming of the alarm).
The other channels are free channels and must be
skipped by pressing either button A or B during the
process.
Follow the chart below and press either button A or
B to select the function you want active. All chan-
nels must be programmed in the following
sequence by pressing either button A or B on the
remote:
R 1200 CL Introduction
After the selecting channel
12, programming is com-
pleted and indicated by
three consecutive beeps.
• Turn off the ignition.
• Wait for the control LED
to flash, the system is
now armed.
• DisArm the alarm system
by pressing button A.
Programming procedure is
now completed.
123