Bernina artista Embroidery Owner's Manual page 36

M
ASTERING
Y
OUR
BERNINA
®
• Return to the Menu Screen.
• Select the seventh alphabet - Bamboo.
• Select the letters to program "BERNINA"; touch OK.
• Select Layout 1; use the layout arrows to move the outline box up until the bottom of the box rests
on the center grid line.
• Touch Temporary Save.
• Touch Menu; select the Bamboo alphabet again.
• Select the letters to program "Embroidery"; touch OK.
- a message will appear indicating that the selected text does not fit in the hoop,
directing you to shrink the size of the lettering or rotate the design.
- touch Esc
• Touch Layout 1.
• Reduce the size of the letters to 90%, then touch Show; watch carefully to see if all
of the letters are now visible on the screen.
• If all letters are not visible, continue to reduce the size to 74%.
• Touch Show to make sure that all the desired letters appear on the screen.
• Use the layout arrows to move the outline box down until the top of the box rests
on the center grid line.
• Touch Temporary Save.
• Touch OK only when the editing is finished.
• Embroider the design.
• Trim and mount sample on the following page.
BERNINA
M Y
ASTERING OUR
BERNINA
WORKING WITH ALPHABETS
Fabric: Firm fabric and stabilizer, 11" x 13"
Needle: Embroidery
Thread: Isacord embroidery thread
Choose thread colors to match design
Presser Foot: Embroidery Foot #15
Module Designs: Bamboo font, Collection 6
1/04/02
®
®
artisa Embroidery
artista Embroidery/36