Bernina artista Embroidery Owner's Manual page 10

M
ASTERING
Y
OUR
BERNINA
®
Layout 1 Icons - continued
• Proportional Resizing Functions
- selecting the left icon decreases the size of the selected motif
- selecting the right icon increases the size of the selected motif
- selecting the center icon returns the motif to the original size (100%)
• Layout 2
- provides access to the Layout 2 screen
• Start
- moves the hoop so that the needle is at the point where stitching starts
• Motif Center
- moves the hoop so that the needle is positioned in the center of the motif
• Check
- defines the outer limits of the embroidery design
- also used to re-code the hoop after a design has been resized
• Show
- changes on-screen image from a rectangle to a small representation of actual stitchery
- useful when resizing or repositioning a motif, and when combining designs
• Del
- deletes the selected motif
- will not delete the last design stored in Temporary Save. To do this, cycle
• Positioning Arrows
- moves the selected motif to a new position within the sewing field
• Center
- moves the selected motif to the center of the sewing field
• Horizontal Mirror Image
- flips the selected image right to left
• Rotate
- rotates selected image in 5 degree increments, clockwise or counterclockwise
• OK
- confirms all changes, engages the stitch processor which recalculates the design
based on the new size parameters, and switches back to the sewing screen when
all calculations are complete
Note: To interrupt or stop the stitching processor, hold in the CLR button
until the Layout 1 screen appears.
BERNINA
M Y
ASTERING OUR
BERNINA
through the last saved design using the Retrieve function, reselect the last
saved design, then touch Del.
1/04/02
®
®
artisa Embroidery
artista Embroidery/10