Bernina artista Embroidery Owner's Manual page 27

M
ASTERING
Y
OUR
BERNINA
®
Hooping the "Onesie"
Note: The following process is best done while the artista is processing
the embroidery design.
• Mark the center of the design placement on the "onesie" with a wash-out marker.
• Turn the "onesie" inside out.
• Using 505 adhesive spray, secure a sheet of Poly-Mesh stabilizer behind the design area
of the "onesie".
• Slide the outer hoop (with attached bracket) through the sleeve of the "onesie" so that the
embroidery area is facing up and the opposite sleeve fits over the free arm of the machine.
• With the template in place in the inner hoop, line up the center of the design and hoop the "onesie".
• To keep the embroidery stitches from disappearing into the knit fabric, apply a layer of Aqua-Film
to the fabric using a light misting of 505 on the Aqua-Film; smooth into place.
• When the stitch processing is complete and the embroidery arm has moved into the proper
position, it is safe to attach the hoop.
• Attach the hoop and embroider the design.
• Use a plastic page protector to secure the "onesie" sample to the following page.
BERNINA
M Y
ASTERING OUR
BERNINA
1/04/02
®
®
artisa Embroidery
artista Embroidery/27