Procedure To Program Spare Securilock Keys To Your Vehicle - Ford 1999 F150 Owner's Manual

Ford 1999 f150
Hide thumbs Also See for 1999 F150:
Table of Contents

Advertisement

Controls and features
keys). Your dealership can program your new SecuriLock
key(s) to
your vehicle or you can do it yourself using the following simple
procedure. To program a new SecuriLock
key yourself, you will need
two previously programmed SecuriLock
keys (keys that already
operate your vehicle's engine). If two previously programmed
SecuriLock
keys are not available (one or both of your original keys
were lost or stolen), you must bring your vehicle to your dealership to
have the spare SecuriLock
key(s) programmed.
Procedure to program spare SecuriLock
keys to your vehicle
New SecuriLock
keys must have the correct mechanical key cut for
your vehicle.
Conventional (non-SecuriLock ) keys cannot be programmed to your
vehicle.
You will need to have two previously programmed SecuriLock
keys and
the new unprogrammed SecuriLock
key readily accessible for timely
implementation of each step in the procedure. Please read and
understand the entire procedure before you begin.
1. Insert the first previously programmed SecuriLock
key into the
ignition and turn the ignition from OFF to RUN (maintain ignition in
RUN for at least one second).
2. Turn ignition to OFF and remove the first SecuriLock
key from the
ignition.
3. Within five seconds of turning the ignition to OFF, insert the second
previously programmed SecuriLock
key into the ignition and turn the
ignition from OFF to RUN (maintain ignition in RUN for at least one
second but no more than 5 seconds).
4. Turn the ignition to OFF and remove the second SecuriLock
key
from the ignition.
5. Within 10 seconds of turning the ignition to OFF, insert the
unprogrammed SecuriLock
key (new key/valet key) into the ignition
and turn the ignition from OFF to RUN (maintain ignition in RUN for at
least one second). This step will program your new SecuriLock
key.
6. To program additional SecuriLock
key(s), repeat this procedure from
step 1.
If the programming procedure was successful, the new SecuriLock
key(s) will start the vehicle's engine. The theft indicator (located on the
instrument panel) will light for three seconds and then go out.
78

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents