CHANNEL DISPLAY
While in this mode, the transceiver displays only
memory channel numbers (or memory names if
stored) instead of frequencies.
1 Press [
] (POWER) + [A/B].
•
The transceiver displays the memory channel
number in place of the operating frequencies.
2 Turn the Tuning control or press [ ]/ [ ] to select
your desired memory channel number.
To recover normal operation, press [
[A/B] again.
Note:
To enter Channel Display mode, you must have at least one
memory channel that contains the data.
If the memory channel contains the memory name data, the
memory name is displayed in place of the memory channel
number.
] (POWER) +
8 MEMORY CHANNELS
21