Odyssey Client; Radio Config Utility; Wireless Zero Config Utility And The Odyssey Client; Figure 3-2 Radio Config Utility Main Menu - LXE MX7 Reference Manual

82

Odyssey Client

Access:
Odyssey automatically installs and runs after every cold and warm boot.
Disable Odyssey
When Odyssey is disabled, the Wireless Zero Config screen is displayed. When Odyssey is
disabled before Suspend mode, it is not re-enabled upon a return from suspend.
Enable Odyssey
When Odyssey is disabled, selecting Enable Odyssey from the Settings menu may not re-enable
Odyssey. Odyssey is enabled by default after every cold and warm reset.
See Chapter 5 "Wireless Network Configuration" for Odyssey client setup information and
instruction.

Radio Config Utility

Access:
Wireless Zero Config Utility and the Odyssey
Client
This utility has an icon in the toolbar that looks like networked computers with a red X through
them, indicating the application is inactive at this time.
Note: LXE recommends using the Funk Odyssey client to configure the Odyssey Client.
Wireless Zero Config is not recommended for configuring the radio.
MX7 Reference Guide
| Programs | Odyssey Client
Start | Programs | Odyssey Client | Settings | Disable Odyssey
Start | Programs | Odyssey Client | Settings | Enable Odyssey
| Programs | Radio Config Utility

Figure 3-2 Radio Config Utility Main Menu

WiFi icon in Toolbar. Tapping the WiFi icon in the toolbar presents the Radio Config
Utility Main Menu to the user. See Chapter 5 "Wireless Network Configuration",
section titled "IEEE 802.11g Wireless LAN Configuration Utility" for WiFi
information and instruction.
Start Menu Program Options
E-EQ-MX7RG-B