Cisco Client; Aironet Client Utility; Cisco Link Status; Client Encryption Manager - LXE MX5 Reference Manual

System Configuration

Cisco Client

Access:
Note:
Tap OK to return to the Programs options.

Aironet Client Utility

Note:

Cisco Link Status

Immediately runs status on : signal strength, signal quality and overall link quality.

Client Encryption Manager

Enter the password to set encryption codes. Default password is "Cisco". The password is case
sensitive.

Client Statistics Utility

Immediately runs statistics, cumulative. An option is available to forward statistics from the client.

Load New Firmware

The current firmware version number is displayed. An option is available to load different
firmware if supplied by the user.
E-EQ-MX5PCRG-F-ARC
the Windows icon | Programs | Cisco | ACU
Online help is not available for this
The parameter values that follow are based on the driver version for the installed radio
card.You may not have all the parameters listed.
Factory Default Settings
SSID
Client Name
Infrastructure Mode
Power Save Mode
Network Security
Type
WEP
WEP Keys
Authentication Types
User Name
User Password
User Domain
LEAP
Mixed Mode
World Mode
Data Rates
Transmit Power
Offline Channel Scan
option.
Other Options
Blank
Blank
Yes No
Fast PSP CAM, Max PSP
None LEAP, Host based EAP
No WEP Static WEP keys, Dynamic WEP keys
Blank
Open Shared Key
Blank
Blank
Blank
Disabled Enabled
Disabled Enabled
Disabled Enabled
Auto 1, 2, 5.5, 11 Mb Only
MAX 1mw, 30mw
Enabled Disabled
59
MX5 Reference Guide