Connecting The Usb Client And Power Cable; Client Cable Assembly - LXE MX9 User Manual

Connecting the USB Client and Power Cable

Connecting the USB Client and Power Cable
Prerequisite : AC/DC Adapter Assembled
Note: Do not connect AC power to the AC Adapter yet.

Client Cable Assembly

1. Holding the cable I/O connector (3), pinch the catch release buttons in until the catches are open. Connect the cable to
the MX9 I/O port by matching the shape of the I/O connector on the cable with the shape of the I/O connector at the
base of the MX9. Release the catch release buttons.
2. Insert the AC adapter single pin cable (2) .
3. Connect the AC Adapter to a power source (wall outlet).
4. Insert the USB client plug (1) into the target USB Client port.
The MX9 and the USB client are connected.
E-EQ-MX9OGWW-D [ 19 ] MX9 User Guide