Troubleshooting Start-Up; Setup The Client And Network - LXE MX5X Reference Manual

Setup the Client and Network

Troubleshooting Start-up

Can't align the screen, change the date/time or
adjust the volume.
RFTerm® opens and runs upon each cold
reset and warm reset.
Touch screen won't accept stylus taps.
The MX5X seems to lockup as soon as it is
warm booted.
Setup the Client and Network
Prerequisites
• Network SSID or ESSID number of the Access Point
• WEP or LEAP Authentication Protocol Keys
See Chapter 5 - Wireless Network Configuration for complete information.
E-EQ-MX5CERG-D
AppLock is installed and running on the mobile device.
AppLock restricts user access to the control panels. See
Chapter 6 - AppLock for setup and processing information.
This activity is the default setting for RFTerm. Tap File |
Exit to close the RFTerm application.
Touchscreen may have been disabled or the touchscreen
may require recalibration. Hold down the Power key and
the Orange key for 4+ seconds to warmboot the device.
Force the Start menu to appear by pressing the right arrow
key and the Blue key to access Start button options, then
use the arrow keys to select menu options (e.g. Start |
Settings ).
There may be small delays while the wireless client
connects to the network, Wavelink Avalanche management
of the MX5X startup completes, and AppLock launch
sequences finalize.
9
MX5X Reference Guide