Salton Elite SRMS01E Instructions And Warranty page 8

5. When using your rice cooker, you may use 1 of 2 methods to measure the amount of
water required:
o The Rice Measuring Cup
o The markings on the inside of the cooking pot.
6. When cooking long grain white rice, use the rice measuring cup and add an equal amount
of water to the cooking pot.
7. Or you may measure using the marking on the inside of the pot
.
8. Add the rice to the pot first and then add the corresponding amount of water.
Example: To prepare 3 cups of raw rice, rinse the rice and add to the cooking pot; add
water up to the LEVEL INDICATOR 3.
As you gain experience, adjust water to personal taste.
9. Replace the cooking pot back in to the rice cooker heating body.
10. Rotate slightly to make sure that it is well seated on the heating plate/thermostat
assembly.
Note: Always wipe the outside of the cooking pot completely dry before use. If the
outside of the pot is wet when placed into the heating body, this may cause crackling
noises as the unit heats up. It may also cause damage to the inner workings of the
appliance.
11. Replace the glass lid.
CAUTION:
Burns or other serious injury may occur.
Raw Rice
3 cups
2 cups
1 cup
Do not operate the automatic rice cooker without replacing the lid.
Water to be Added
3 cups
2 cups
1 cup
MAX LEVEL
Do not fill above this line
8