Tuner Operation (Preset Memory) - Marantz SR3053 User Manual

ADVANCED OPERATION
NIGHT MODE
Press the NIGHT button on the remote controller to
turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby
Digital only, and it compresses the dynamic range.
This softens loud passages such as sudden
explosions, to help prevent disturbing others late
at night.
To turn off the Night mode, press the NIGHT button
again.
LISTENING THROUGH HEADPHONES
This jack may be used to listen to the unit's output
through a pair of headphones. Be certain that the
headphones have a standard 1/4" stereo phono
plug.
Note that the speakers will automatically be turned
off when the headphone jack is in use.
Notes
• When using headphones, the surround mode will
change to STEREO.
• The surround mode returns to the previous setting
as soon as the headphone plug is removed from
the jack.
20
5.1 CH INPUT
This unit is equipped for future expansion through the
use of Multi channel Super Audio CD multichannel
player or DVD-Audio player.
When this is selected, the input signals connected
to the L(front left), R (front right), CENTER, SL
(surround left), SR (surround right) channels of the
5.1 CH.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
When 5.1 CH. INPUT is selected, the last video input
used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video
sources.
1.
1.
2.
4.
3.
1.
Select a desired Video source to decide
the routed video signal to the Monitor
Outputs.
2.
Press the 5.1 CH IN button on the remote
controller to switch the 5.1 channel input.
3.
If it is necessary to adjust the output level
of each channel, press the LEVEL button on
the remote controller.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the
front left, front right, center, surround left,
surround right speakers, the output levels
can be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between
4.
–10 and +10 dB.
These adjustments result will be stored to
5.1 CH. INPUT memory.
4.
Adjust the main volume with the MAIN
VOLUME knob or the VOLUME buttons on
the remote controller.
To cancel the 5.1 CH. INPUT setting, press EXIT on
the remote controller.
Notes
• 5.1 CH. Input mode bypasses the internal
surround processing, so SURROUND mode
cannot be selected.
• In addition, there is no signal at the record
outputs when the 5.1 CH. Input is in use.
TUNER OPERATION
(PRESET MEMORY)
With this unit you can preset up to 50 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
2. 4. 1. 3. 2. 5.
1.
To select FM, press the BAND button on the
front panel.
2.
While pressing the MEMORY button, press
the 2 cursor button.
"AT-PRESET" will appear on the display,
and scanning starts from the lowest
frequency.
3.
Each time the tuner fi nds a station, scanning
will pause and the station will be played for
fi ve seconds.
During this time, the following operations
are possible.
The band can be changed by the BAND
button.
4.
If no button is pressed during this period,
the current station is memorized in location
Preset 01.
If you wish to skip the current station, press the
3 cursor button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are fi lled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
Note
It is possible that existing preset memory positions
will be overwritten.