Messages - Garmin GPSMAP 296 Pilot's Manual

Portable aviation receiver
Hide thumbs Also See for GPSMAP 296:
Table of Contents

Advertisement

A
>
M
PPENDIX
ESSAGES

Messages

Approaching Turn: You are nearing a turn in a route.
Approaching VNAV Profile: You should reach your initial descent point in
one minute.
Arriving at Destination: You are nearing your destination.
Batteries Low: The battery needs to be recharged.
Can't Unlock Maps: No applicable unlock code for one or more maps was
found. All MapSource maps are not accessible.
Database Error: Internal problem with the unit. Contact your dealer or Garmin
Product Support to have the unit repaired.
Deep Water: The water is deeper than the amount set in the Deep Water Alarm.
Dragging Anchor: The distance set in the Anchor Drag Alarm is exceeded.
Lost Satellite Reception: The unit is unable to receive satellite signals.
Memory Full: Unit memory is full, no further data can be saved.
Near Proximity Point: You have reached the distance set for a proximity
waypoint.
No Diff GPS Location: RTCM is selected but the unit is not receiving DGPS
data.
None Found: No data matched the search criteria.
No Tide Stations for that Area: No tide stations within 100 miles of the area.
Off Course: You are off course the distance set in the Off Course Alarm.
Proximity Memory Full: No additional proximity waypoints can be saved.
144
Proximity Radius Overlaps: The radius of two proximity waypoints overlap.
Route Already Exists: You have entered a route name that already exists.
Route Memory Full: No additional routes can be saved.
Route Truncated: Uploaded route from another device has more than 50
waypoints.
Route Waypoint Memory Full: No additional route waypoints can be saved.
Shallow Water: The water is shallower than the amount set in the Shallow
Water Alarm.
Track Already Exists: A saved track with the same name already exists.
Track Log Full: The track log is full and track recording has been turned off.
In order to record more track points, you will need to clear the track log and
turn track recording on.
Track Memory Full: No more track data can be stored. Delete the old track
data to store the new data.
Track Truncated: A complete uploaded track will not fit in memory. The
oldest track log points have been deleted.
Transfer Complete: Data transfer has been completed.
Waypoint Already Exists: A waypoint with the same name already exists.
Waypoint Memory Full: The unit has stored the maximum number of
waypoints.
GPSMAP 296 Pilot's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents