Learning About The Keypad - Garmin GPSMAP 296 Pilot's Manual

Learning about the Keypad

Press the IN key to adjust the map scale to show a smaller
area with more detail (zoom in).
Press the OUT key to adjust the map scale to show a larger
area with less detail (zoom out).
Press the PAGE key to cycle through the main pages
in sequence and exit a submenu page. Press and hold to
switch between Aviation, Marine, and Automotive Modes.
Press QUIT to cycle the unit through the main pages in
reverse sequence, revert to the previous value in a data
entry field, or cancel an unintended function.
Press ENTER to select a highlighted option. When
entering data, it allows you to initiate entry and accept the
selected value. Press and hold for more than one second to
mark your current location as a waypoint.
Press MENU to display a menu of available options for
the current page. Press MENU twice to display the Main
Menu.
GPSMAP 296 Pilot's Guide
G S
ETTING TARTED
Press the NEAREST (NRST/FIND) key to display the
nearest airports, navaids, points of communication, and
airspace boundaries in Aviation Mode. In other modes (or
when pressed multiple times in Aviation Mode), press to
display the Find Menu.
Press the (Direct To) key to activate a Go To to
airports, navaids, recently-used waypoints, or user-
created waypoints. Press and hold to display additional
information for the current destination.
While in Automotive Mode, press and hold to display the
Next Turn page and announce the next turn when using the
external speaker.
Press and hold the POWER key for more than one second
to turn the unit on and off. Briefly press and release to
adjust the backlighting and external speaker volume.
Use the Rocker key to highlight options and to enter
data. Also use to pan the arrow on the Map page.
> L K
EARNING ABOUT THE EYPAD
7