Appendix
Appendix
Ways to Charge Your
nüvi
•
Use the vehicle power cable.
•
Use the USB cable.
•
Use an optional AC adapter cable.
Resetting the nüvi
If the nüvi stops functioning, turn off the
nüvi, and then turn on the nüvi.
If this does not help, slide the
key to the left and hold it for 8 seconds.
Turn on the nüvi again. The nüvi should
operate normally.
Calibrating the Screen
If the touchscreen is not responding
properly, calibrate the touchscreen.
1. Turn off the nüvi.
2. Hold your finger on the middle of the
3. Turn on the nüvi, and immediately
4. Continue to hold your finger on the
Power
5. Follow the on-screen instructions.
6. Slide the power button to the middle
screen.
slide the power button to the right
(lock).
screen for about one minute until the
calibration screen appears.
to unlock the screen.
nüvi 705 Series Owner's Manual