Troubleshooting Guide: Bds552, And Bds1642 2-1 Stand - Bowflex 220 DUMBBELLS Service Manual

TROUBLESHOOTING GUIDE
BDS552 Chrome Stand and
- Assembly Troubleshooting
STAND
Problem:
The Towel Bar cannot be attached to both Dumbell Platforms.
See Figures 1A and 1B.
Solution:
The Left and Right Dumbbell Platforms are installed on the
wrong Legs, and need to be switched. Please refer to the Parts
List item numbers and Exploded View in this service manual.
Detailed assembly instructions are provided in the Assembly
Manual.
Tools:
• 7/32" Hex Key
• 9/16" Socket
• 9/16" Wrench or Adjustable Wrench
Steps:
1-1 Unscrew the Towel Bar (#9) from the Dumbbell Platform
(#7 / #8). Set the hardware safely aside.
Unscrew the Dumbbell Platforms (#7 and #8) from the
1-2
stand Legs (#1). Set the hardware for each Platform
safely aside.
Attach the Right Platform (#7) to the right Leg (#1) and the
1-
Left Platform (#8) to the left Leg (#1) using the hardware
from Step 1-2.
When you reinstall the Dumbbell Platforms on the stand,
Note:
check the following:
• The Dumbell Platforms should be installed so that the
screw holes for attaching the Towel Bar are closer to
the upper end of each platform. See Figure 2.
BDS1642 2-in-1
Figure 1A – Incorrect Assembly
Figure 1B – Close-up
5