Changing Ip Address Or Forgotten Admin Password - Planet IPX-330 Installation Manual

Step 2. Edit your ETH port IP information.
There are three types of Ethernet port connection. They are Static IP, PPPoE
(Point-to-Point Protocol over Ethernet), DHCP. You can find detailed setting process
in the user manual.

2.3.3 Changing IP Address or forgotten admin password

To reset the IP address to the default IP Address "192.168.0.1" (ETH) or reset the
login password to default value. Press the reset button on the front panel for more
than 6 seconds. After the device is rebooted, you can login the management WEB
interface within the same subnet of 192.168.0.xx.
After pressing the "Reset" button, all the system data will be reset
to default; if possible, back up the config file before resetting.
Note
14
Selection of IP Connection Type
12V DC
Console ETH
Reset
Reset Button