Table of Contents
Advertisement
2. Preparation
2 Preparation
Connections and Setup
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord supplied
with this unit.
L Do not extend the telephone line cord.
3
5
6
4
1 Power cord
L Connect to a power outlet
(220–240 V, 50/60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack (RJ11).
3 [EXT] jack
L You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)
5 To the internet
6 Network router/Network hub (not supplied)
L Also connect networked computers.
7 LAN cable (not supplied)
L To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
8 Automatic duplex unit (optional) connector
IMPORTANT NOTICE FOR THE USB
CONNECTION
L DO NOT CONNECT THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 27).
20
8
7
1
2
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter (9), please
connect it as follows.
9
Designed to be used in Czech, Hungary, Slovakia
and other Eastern Europe according to the
location setting feature.
The default setting is Czech. To change the location
setting, see page 62 (feature #114).
Advertisement
Table of Contents
