1. Introduction and Installation
1.7 Handset unit
You can add the handset unit. See page 9 for
accessory information.
1
Connect the handset cord (1) to the handset cradle.
2
Connect the handset connector (2).
L Remove the seal from the handset unit
connection jack if attached.
18
1
2
3
Lift the handset unit in the direction of the arrow (3)
to insert the tab (4), then insert the rib (5) by
pushing the handset unit toward the unit.
5
3
4
Pull out the handset cord holder (6) and pass the
handset cord (7) through the handset cord holder.
7
4
6