Outdoor Unit Installation - Carrier ROOM AIR CONDITIONER Installation Manual

INSTALLATION INSTRUCTIONS

Outdoor unit installation

Outdoor installation precaution
Install the outdoor unit on a rigid base to
prevent increasing noise level and vibration.
Determine the air outlet direction where the
discharged air is not blocked. In the case that
the installation place is exposed to strong wind
such as a seaside, make sure the fan operating
properly by putting the unit lengthwise along the
wall or using a dust or shield plates.
Specially in windy area, install the unit to prev-
ent the admission of wind. If need suspending
installation, the installation bracket should
accord with technique requirement in the
installation bracket diagram.
The installation wall should be solid brick,
concrete or the same intensity construction, or
actions to reinforce, damping supporting should
be taken. The connection between bracket and
wall, bracket and the air conditioner should be
firm, stable and reliable.
Be sure there is no obstacle which block
radiating air.
Settlement of outdoor unit
Anchor the outdoor unit with
a bolt and nut φ10 or φ8 tightly
and horizontally on a concrete
or rigid mount.
Outdoo r unit dimensi on
mm(L1x HxW1)
760x590x285
845x700x320
900x860x315
990x965x345
Mounting dimensions
L2(mm) W2(mm)
530 290
560
335
590
333
624
366
28
Strong
wind
Fig.51
Fig.52