Hardware Installation
Onboard LAN LED Definition
When this LED is lit
( green sign ), this means
the LAN is running at 100
mbps, if it is not lit, the
Onboard LAN is working
at 10 mbps.
When this LED is lit ( red
sign ), this means the LAN
is running at 1 Gbps, if it
is not lit, the Onboard
LAN is working at 10
mbps.
Step 5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks,
Note: If you have failed to enter the BIOS Setup utility, wait until
the boot up sequence is completed. Then push the RESET button
and press <DEL> key again at the beginning of boot-up, during
diagnostic checks.
SY-P4I875P DRAGON 2
43
This is the LAN activity
LED. It will blink when
it is active.
This is the LAN activity
LED. It will blink when
it is active.