SOYO SY-P4I875P DRAGON 2 User Manual page 137

When I boot up my system, everything works fine, it sees my CPU and
memory, detects my hard drive, floppy drive and CD-ROM but locks up
at "Verify DMI pool data... "it doesn't go any further. What should I do?
1. Clear the CMOS ram. (JP5 connector, see the manual for more info
on how to clear the CMOS).
2. If it still has the problem, remove all other add-on cards except the
video card see if it boots further. Then put peripherals in one by one
to identify which one causes the lockup.
3. Change the CPU.
During Boot-up, my computer says CMOS memory Checksum error.
What is the problem? This error occurs if you:
1. Clear CMOS memory.
2. Redo your CMOS setup settings. If your battery is empty the error
will occur more frequently. You will need to replace the battery in
this case. If the problem persists, re-flash the BIOS. If all fails your
BIOS chip is failing and needs to be replaced.
3. Change the CMOS battery.
4. Re-flash BIOS.
5. The BIOS chip might be failing.
Stability Issues
My system intermittently locks up, very unstable.
1. Check the CPU Temp, it might be overheating. Change the CPU
FAN. (Check in the health monitor setup menu what your CPU
temperature is)
2. Do not overclock your CPU
3. Check the specification of the memory module, maybe the M/B
does not support it.
4. Go to BIOS setup and load fail-safe settings. Please check if the
system performance in the BIOS setup is set to Turbo/Maximum.
Set it to normal if so.
5. Check the website for latest BIOS update.
6. Check the website for FAQ's regarding instability issues.
132