Radio Enable - Vertex Standard VXD-720 Operating Manual

Radio Enable
Procedure:
Use the programmed Radio Enable button.
1 Press the programmed Radio Enable button.
2 or to the required alias or ID and press
to select.
3 The display shows "Radio Enable: <Subscriber
Alias or ID>
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display
shows "Radio Enable Successful
OR
If not successful, a tone sounds and the display
shows "Radio Enable Failed
84
OR
Procedure:
Use the menu.
1 to access the menu.
2 or to "Contacts
The entries are alphabetically sorted.
3 or to the required alias or ID and press
to select.
OR
or to "Manual Dial
Key in the subscriber alias or ID and press
4 or to "Radio Enable
lect. The LED blinks green.
5 The display shows "Radio Enable: <Subscriber
Alias or ID>
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display
shows "Radio Enable Successful
OR
If not successful, a tone sounds and the display
shows "Radio Enable Failed
Do not press during the Radio Enable
operation as you will not get an acknowledgement
message.
to select.
to select.
.
to se-­