Making A Call A Lert; With The One Touch A Ccess Button; Emergency Operation - Vertex Standard VXD-720 Operating Manual

Making a Call Alert with the One Touch Ac-­
cess Button
Procedure:
1 Press the programmed One Touch A ccess but-­
or ID.
2 The display shows "Call Alert: <Subscriber Alias
or ID>
sent.
3 The LED lights up solid green when your radio
is sending the Call A lert.
4 If the Call Alert acknowledgement is received,
a tone sounds and the display shows "Call Alert
Successful
OR
If the Call Alert acknowledgement is not re-­
ceived, a tone sounds and the display shows
"Call Alert Failed
64
Emergency Operation
An Emergency Alarm is used to indicate a critical
situation. You are able to initiate an Emergency at
any time on any screen display even when there is
activity on the current channel.
Your dealer can set the duration of a button press
for the programmed Emergency button, except for
long press, which is similar with all other buttons:
seconds
seconds
The Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer
for the assigned operation of the Emergency
button.
If short press the Emergency button is assigned
to turn on the Emergency mode, then long press
the Emergency button is assigned to exit the
Emergency mode.
If long press the Emergency button is assigned
to turn on the Emergency mode, then short press
the Emergency button is assigned to exit the
Emergency mode.