Use the keypad to type your message.
Press
to move one space to the left.
Press
or the
the right.
Press the
key to delete any unwanted
characters.
5 Press
once message is composed.
6
or
message.
OR
or
to "Save
message to the Drafts folder.
OR
to edit the message.
again to delete the message or save it to
the Drafts folder.
7
or
to the required alias or ID and press
to select.
OR
or
to "Manual Dial
lect.
Key in the subscriber ID and press
8 The display shows "Text Message: <Subscriber/
Group Alias or ID>
being sent.
9 If the message is sent, a tone sounds and the
key to move one space to
to send the
to save the
to se-
.
display shows "Message Sent
OR
If the message is not sent, a low tone sounds
and the display shows "Message Send Failed
If the text message fails to send, the radio returns
you to the "Resend" option screen (see Managing
Fail-to-Send Text Messages on page 74).
Sending a Quick Text Message
Your radio supports a maximum of ten (10) Quick
Text messages as programmed by your dealer.
While Quick Text messages are predefined, you
can edit each message before sending it.
Procedure:
Press the programmed Text Message button and
proceed to Step 3.
OR
Follow the procedure below.
1
to access the menu.
2
or
to "Message
3
or
to "Quick Text
lect.
4
or
to the required Quick Text and press
to select.
5 A blinking cursor appears.
Use the keypad to edit the message, if required.
to select.
to se-
71