Hearth and Home Technologies SMART-BATT-II Installation And Operating Instructions Manual page 5

If your fi replace looks like Figure 7, fi nd the leads on the back of switch marked "For use with remote or wall switch only".
Take the leads and plug them into wire leads on remote receiver box (see Figure 8).
BATTERY PACK
Figure 8. Intermittent Pilot Ignition (IPI) Wiring Diagram
Hearth & Home Technologies • SMART-BATT-II Remote Control Instructions • 100-909 Rev. i • 5/12
REMOTE
RECEIVER
WIRE
TERMINAL
TRANSFORMER
3 VAC
PLUG IN
BLACK
RED
ON/OFF SWITCH
IGNITION
MODULE
3 VAC
ON/OFF
SLIDE
SWITCH
FIREPLACE CHASSIS
For use with
remote or wall
switch only
PIGGYBACK
I
INTERMITTENT
S
WHITE
ORANGE
GROUND TO
VALVE
PILOT
IGNITOR
5