Adjusting The Print Darkness - Intermec EasyCoder 3400 Getting Started Manual

Intermec Τechnologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. technical and service support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian technical and service support: 1-800-688-7043
Canadian media supplies ordering information: 1-800-268-6936
Outside U.S. and Canada: Contact your local Intermec service supplier.
Related Manuals You Can Order
3400, 3440, and 3600 Bar Code Label
Printer User's Manual
Data Communications Reference Manual
Model 200 Controller System Manual
The information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change without notice.
1998 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, EasyCoder, Duratherm, EZ Builder,
Precision Print, PrintSet, Virtual Wedge, and CrossBar are trademarks of Intermec Technologies
Corporation.
Kimdura is a registered trademark of Kimberly Clark.
Kapton is a registered trademark of Dupont.
The name Centronics is wholly owned by GENICOM Corporation.
IBM is a registered trademark of International Business Machines Corporation.
Throughout this manual, trademarked names may be used. Rather than put a trademark ( ) symbol in
every occurrence of a trademarked name, we state that we are using the names only in an editorial
fashion, and to the benefit of the trademark owner, with no intention of infringement.
The software contained in the printer and the accompanying materials are copyrighted. Unauthorized
copying of the software, including software that has been modified, merged, or included with other
software, or the written materials is expressly forbidden without the prior written consent of Intermec.
All right, title, and interest in all copies of this software are and shall at all times remain the sole and
exclusive property of Intermec. Customer may be held legally responsible for any copyright
infringement that is caused or encouraged by its failure to abide by these terms.
Intermec Part Number
065145
044737
063439

Adjusting the Print Darkness

Use the darkness adjust control to fine-tune the darkness of print on your labels. The fine
adjustments compensate for variations in the media, the printhead, or the printer. Set the
darkness adjust control after you enter the media sensitivity number.
A
O
A Locate the darkness adjust control on the back of the printer.
B Use a small straight-slot screwdriver to adjust the print darkness:
• To increase the print darkness, turn the control clockwise.
• To decrease the print darkness, turn the control counterclockwise.
B
3440G.055
25