Char-Broil Commercial Series Assembly, Use And Care Manual page 7

Hide thumbs Also See for Commercial Series:
Table of Contents

Advertisement

10. Remove protective film from doors. Install door handles to
doors using 4 of the 3/16x3/8" Phillips-head screws. See
Fig. 4.
11. Attach the 4 side shelf brackets to the tops of the cart legs
using 8 of the 1/4x1/2" Phillips-head screws.
IMPORTANT: Bracket with cut-out installs on front left
leg. Be sure the flat side of each bracket faces outward.
Fully tighten. See Fig. 4.
12. Place the sideburner shelf over the left brackets and cross
brace. Be sure ignitor wire is hanging loose. Be sure the
inside shelf holes align with cross brace holes. Secure
shelf firmly to the ends of the brackets using 2 of the
1/4x1/2" Phillips-head screws. Repeat this procedure for
the side shelf on the right side of the cart. See Fig. 4.
FIGURE 4
Bracket with
cut-out
Lower
hole
Door Stop
Door
bracket
Door
Handle
Remove
Hinge
film
Attach the door stop to the bottom shelf, with the flange facing
the front, using 2 of the 3/16x3/8" Phillips-head screws. Fully
tighten. See Fig. 4.
Sideburner
shelf
Align
holes
Shelf bracket,
flat side facing
outward
Hinge
hole
13. Attach match lighting stick
and chain to the right rear
leg, below shelf bracket,
using one M4x10mm,
self-tapping, Phillips-head
screw. See Fig. 5.
To reduce the weight of the grill head, open the grill lid and
remove the packed components. This step requires 2 people
to lift and position the grill head onto the cart.
14. HINT: Slide grill head into cart from the front. Use care to
avoid scratching tops of side shelves. Align the 2 holes
beneath the hang ledge on each side of the grill head with
the 2 holes in the side shelf and cross brace on the cart.
Raise the grill lid and insert 4 of the 1/4x3/4" Phillips-head
screws. Beneath the side shelves, add 1/4" nuts. Do not
fully tighten. See Fig. 6.
Side
shelf
15. Attach heat indicator to grill lid using nut provided. Make
sure graphics on heat indicator are properly oriented before
tightening nut. See Fig. 6.
FIGURE 6
Heat indicator
Gas hose
FIGURE 5
Grill
head
Match
lighting
stick
Hang
ledge
Hang
ledges
rest on
shelves
463231603 • 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents