Manually Selecting Achannel - Radio Shack 200 Ch VHF/Air/UHF Home Scanner Owner's Manual

Notes:
• You can manually select any chan-
nel in a bank, even if the bank is
turned off.
• You cannot turn off all ten banks.
• The scanner skips channels that
have been locked out (see "Skipping
Frequencies/Channels" on Page 19.
MANUALLY SELECTING A
CHANNEL
You can continuously monitor a specific
channel without scanning. This is useful
if you hear an emergency broadcast on
a channel and want to hear all the de-
tails (even though there might be peri-
ods of silence) or if you want to monitor
only a specific channel or a locked-out
channel.
Follow these steps to manually select a
channel.
1. Press
MANUAL
2. Use the number keys to enter the
desired channel number, then press
again.
MANUAL
Notes:
• If your scanner is scanning and
stops at the desired channel, simply
press
MANUAL
the channel.
• If you repeatedly press
the scanner steps through the chan-
nels.
18
.
to manually select
MANUAL
,