Editing Objects Manually; Recording And Playback - Radio Shack PRO-668 User Manual

Editing Objects Manually

1. From the main menu, select
2. Use the four-direction pad to select an object.
NOTE: Your iScan organizes imported objects beginning at
Playlist 151, named by service. Playlist 1 may be empty.
3. Press MENU to enter the Object Edit menu:
Frequency The frequency for the object.
Alpha Tag
The display name for the object.
Set Playlists Assign the object to playlists.
Rx Mode Receiving mode
Sq Mode
Squelch mode
Sq Search Activates a search for the Squelch code
Sq Code
Squelch code
Sq Exclude
Excludes squelch
Locked Out Locked objects are not scanned.
Skipped
Skipped objects are not scanned.
Priority Priority object are checked more frequently.
Delay Set a scan delay after a transmission ends.
Attenuate
Applies attenuation to the object
AGC Reduces interference from strong local
transmitters (conventional frequencies only).
Alarm Select a sound used for alarms.
Light
On, Off, or Flash.
Flash Pattern Alert LED flash pattern.*
On Time / Off Flash pattern step duration. (Percentage: 100
Time
= 1 second, 50 = 1/2 second).
LED Enabled
Enables the Alert LED.
LED Flash Enables Alert LED flash patterns.
Color Count The number of Alert colors. 0 = off.
Color 1-4
Hexidecimal value for each color.
Record Record received transmissions.
( = Record this object)
Delete Object Deletes the programmed object; the
frequency remains in the iScan library for later
programming, if desired.
5. Use the four-direction pad and SEL button to change
settings. ( = selected)
6. Select
Save Changes
Browse Objects
and press SEL.
20

Recording and Playback

.
Your iScan contains a 2GB MicroSD card that can store over
50 hours of recording time. After you activate the recording
feature, you can record all transmissions for specific objects
and transmissions found during a search.
To enable the recording feature:
1. Press MENU to access the main menu.
2. Select
3. Select
4. To record during frequency searches, select
Record
5. Select
6. Edit the object and activate the
"Editing Objects Manually" on page 20.
To play back recordings:
1. Press MENU to access the main menu.
2. Select
3. Press
4. You can press MENU for a list of playback options:
• Main Menu – Returns to the main menu.
• Back – Returns to the list of recorded files.
• Play From Here – Plays the current recording and
• Delete All – Deletes all recorded audio files.
• Delete Earlier – Deletes recorded audio files prior
• Delete Later – Deletes the selected audio file and
5. Press SKIP to stop playback.
and press .
Settings
and press .
Enable Record
and press .
and press .
Save Changes
and press .
Playback

/II to play the file.
Previous
Rewind
Next
all recordings afterwards.
to the selected audio file.
all recorded audio files after the selected file.
21
Search
setting. See
Record
Forward