Advertisement
Defiant Encore 0028/2140 Assembly Service Manual
General:
All parts were carefully inspected and cleaned to bare metal or replaced
during the disassembly process. Assembly may now begin. To achieve a
properly functioning, air tight stove, 6 each, 11 oz. tubes of thermocement,
part number 120-6125 are required. Cut the thermocement tube tips so
that a ¼"- 3/8" unbroken bead of thermocement may be applied to the
cement channels, flanges and/or flat mating surfaces.
*NOTE:
Cement is indicated by the shaded area in the "C" series illustrations.
**Caution
Pay strict attention to the type, size and number of fasteners called for in
the exploded view drawings, parts list and text.
STEP 1:
Place the stove bottom upside down on a flat surface. Install 4 each, hex
head leveler bolts (¼" -20x1") in the 4 stove legs, finger tight. Install the
4 legs on the stove bottom using 4 each hex head bolts (3/8"-16x1-¼") and
4 each, standard flat washers (3/8").
between the flat washer and the bolt head on the left front leg (right front
leg when the bottom is turned over to its normal position).
STEP 2:
Assemble the two piece half hinge using 2 each, hex head cap screws (¼-
20 ¾") and 2 each, standard flat washers (¼") finger tight. Install the two
piece half hinge on the ash drop, clevis facing the door opening with 3
each, hex head cap screws (¼-20x ¾") and 3 each, standard flat washers
(¼") finger tight.
STEP 3:
Cement the stove bottom at points indicated in Figure C-1. Place the ash
drop on the stove bottom and secure with 4 hex head cap screws (¼-20 x
¾") and 4 each, standard flat washers (¼").
Fig. C-1
Bottom (bottom view)
Place the stove handle holder
Advertisement
