Performing The Bios Update; Reassembling The System - NEC Versa 6220 Service And Reference Manual

Hide thumbs Also See for Versa 6220:
Table of Contents

Advertisement

SOLD BY laptopia2005 DO NOT RESELL!!
2-20 Setup and Operation

Performing the BIOS Update

Use the following procedure to perform the actual BIOS update.
Figure 2-18 Reassembling the System
T
Slide the speaker caps back onto the system.
T
Close the LCD panel and turn the system upside down.
T
Replace the speaker cap screws.
Your system is now ready for the BIOS update. Continue to the next section to
9.
update the BIOS.
1.
Make sure that the computer is operating under AC power, and that the power is
off. Insert the BIOS Update diskette into diskette drive A.
Power on the computer with the diskette in drive A. The computer boots and
2.
automatically loads the utility. A message similar to the following appears:
WARNING: The BIOS Update Procedure
is about to begin, press ENTER to continue.
To abort, remove the diskette and reset the unit.
Press
to continue.
3.
Enter
The utility checks the currently installed BIOS version and the diskette's BIOS
version. The Main Menu appears.
SOLD BY laptopia2005 DO NOT RESELL!!

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa 6230Versa 6260

Table of Contents