Table of Contents
Advertisement
Updating the BIOS
The BIOS is code transmitted onto your system's Flash ROM. As indicated in this
chapter, you use the BIOS Setup utility to configure your system's software and
hardware features. Use the BIOS Update Diskette for your specific model to update
your NEC Versa system BIOS.
Note
improvements or fixes to the current system BIOS. Your authorized NEC dealer or NEC
support representative can help you determine this.
To update the system BIOS you must:
Obtain the BIOS Update
!
Prepare the BIOS Update Diskette
!
Perform the BIOS Update
!
Obtaining the BIOS Update
If you are informed that the default BIOS needs an update contact the NEC Computers
Support Services at (800) 632-4525, Fax (801) 579-1552, or access the web site,
www.neccomp.com to obtain a copy of the BIOS update.
Note
please contact a local NEC or dealer in your country.
Performing the BIOS Update
Follow these steps to perform the BIOS update. Before you begin, be sure to:
Connect the computer to AC power and power off the computer.
!
Configure the Boot Device Setup to boot from a floppy diskette.
!
Remove any bootable CDs from the CD-ROM drive, if connected.
!
Document all customized BIOS settings
!
You only need to update the BIOS if NEC Computers makes significant
If you purchased and are using this computer outside the U.S. or Canada,
Using the BIOS Setup Utility 3-17
Advertisement
Table of Contents
